Cleveland Steel Tool Handy-Mag II, User Manual

Page: 7 / 15

Getting Started
Your Handy-Mag II package should contain the following parts:
QTY Part# Description
1 HM II Handy-Mag II
1 Carrying Case
1 Owners Manual
2 ME5091 Flat Washer
2 ME5092 Butterfly Bolt (M6 x 10)
1 ME5098 Coolant Tank
1 ME5046 Coolant Tube
1 ME5096 Chip Guard
1 ME5093 Wrench (M8)
1 ME5094 Hex Wrench (M2.5)
1 ME5095 Hex Wrench (M4)
3 ME5071 Crank Handle
1 ME5097 Safety Chain
Attach 3 crank handles (ME5071) to the crank spindle (ME5072). Attach the coolant tube
(ME5046) to the coolant tank (ME5098). Attach the coolant tank to the Handy-Mag II to the
top of the slide with screw provided. Attach open end of the coolant tube to the coolant con-
nector (ME5010).
Handy-Mag
II
What You Need To Know
Type of material to be drilled, Brinell or Rockwell hardness, material thickness and position
should all be determined to ensure proper selection of Handy-Mag II cutting tools, RPM, coolant
and drilling time.
Remove any excessive mill scale or rust from the surface to be drilled.
When drilling materials under 3/8" thick, an additional steel plate may be required to achieve
proper magnetic adhesion.
Drilling stacked material requires a special STACKED GEOMETRY cutter.
Material that has been flame cut may have become heat treated and therefore difficult to drill.
Avoid drilling near such areas whenever possible.
Drilling with the Handy-Mag II in horizontal positions requires a special lubrication for Handy-Mag
II cutters. Consult The Cleveland Steel Tool Co. for details.
5