5
4. EZ-GC-ST installation instruction
Slide pre-assembled Grounding Clip and inter clamp assembly into position as shown,
opening under the first
Slightly lift the solar module and slide the Grounding Clip and inter clamp assembly into
position. The Clip’s teeth will automatically be aligned under the edge of the module
when the inter clamp assembly is correctly installed.
ImportaCCCCCnt Note:
To correctly install the EZ-GC-ST, ensure that the solar
modules are fully in contact with the inter clamp.
Visually check that the EZ-GC-ST is properly positioned,
teeth fully covered by the frame of the panel.
