background image

 

 

PV-ezRack Solar Terrace II_Planing and Installation Guide_V1.3 

Page 11 of 11

 

 

11/20 Duerdin St 

 

 

Tel: +61 3 9017 6688 

Clayton VIC 3168, Australia    

 

 

Fax: +61 3 9017 6668 

www.clenergy.com.au 

 

Email: [email protected] 

 

 
10 Years Standard Warranty Terms and Conditions 

20 Year Designed Service Life 

 

Clenergy  international co. Ltd warrants to the original purchaser (“Purchaser”) 

of  product(s)  that  it  manufactures  (“Product”)  at  the  original  installation  site 

that the Product shall be free from defects in material and workmanship for a 

period  of  ten  (10)  years,  except  for  the  anodised  finish,  which  finish  shall  be 
free  from  visible  peeling,  or  cracking  or  chalking  under  normal  atmospheric 

conditions  for  a  period  of  five  (5)  years,  from  the  earlier  of  1)  the  date  the 

installation of the Product is completed, or 2) 30 days after the purchase of the 

Product by the original Purchaser (“Finish Warranty”).

 

The  Finish  Warranty  does  not  apply  to  any  foreign  residue  deposited  on  the 
finish.  All  installations  in  corrosive  atmospheric  conditions  are  excluded.  The 

Finish  Warranty  is  VOID  if  the  practices  specified  by  AAMA  609  &  610-02 

 

“Cleaning  and  Maintenance  for  Architecturally  Finished  Aluminium” 

(www.aamanet.org)  are  not  followed  by  Purchaser.  This  Warranty  does  not 

cover  damage  to  the  Product  that  occurs  during  its  shipment,  storage,  or 
installation. 

This  Warranty  shall  be  VOID  if  installation  of  the  Product  is  not  performed  in 

accordance with Clenergy’s written installation instructions, or if the Product has 

been modified, repaired, or reworked in a manner not previously authorized by 

Clenergy IN WRITING, or if the Product is installed in an environment for which 
it was not designed. Clenergy shall not be liable for consequential, contingent or 

incidental damages arising out of the use of the Product by Purchaser under any 

circumstances.  
If within the specified Warranty periods the Product shall be reasonably proven 

to be defective, then Clenergy shall repair or replace the defective Product, or 

any part thereof, in Clenergy’s sole d

iscretion. Such repair or replacement shall 

completely  satisfy  and  discharge  all  of  Clenergy’s  liability  with  respect  to  this 

limited  Warranty.  Under  no  circumstances  shall  Clenergy  be  liable  for  special, 
indirect or consequential damages arising out of or related to use by Purchaser 

of the Product. 
Manufacturers of related items, such as PV modules and flashings, may provide 

written  warranties  of  their  own.  Clenergy’s  limited  Warranty  covers  only  its 

Product, and not any related items. 

 

 

Summary of Contents for PV-ezRack SolarTerrace II












Reviews: