APOLLO WiComm 2 WIRELESS COMMUNICATION SYSTEM
Page 3
© 2018 CLEMCO INDUSTRIES CORP.
www.clemcoindustries.com
Manual No. 29043
2.0
INITIAL SET UP and TEST
2.1
Set up and charge radio(s) per instructions
supplied with the radio.
2.2
Refer to Figure 2 and align the groove on the
headset cable connector with the mating ridge in one of
the PTT connectors (the cable may be attached to either
of the two PTT connectors) and insert the cable
connection into the PTT switch. Screw the retaining ring
onto the PTT threads to secure the connections.
2.3
Align the groove on the radio cable connector
with the ridge in the remaining PTT connector and
secure the connection, as noted in Paragraph 2.2.
Figure
2
2.4
Don the holster and adjust shoulder and waist
straps to position the holster about the chest area.
2.5
Adjust Headset
‒
Figure 3
2.5.1
Don the headset, placing the crown strap over
the head and the rubber headband at the back.
2.5.2
Unfasten the top band on the crown strap and
adjust the headset so the bone-conduction speakers are
against the protruding bone in front of the ears. Press
the end of the strap to latch it.
NOTE: Some readjustment may be required to find the
position on the bone that provides the best reception.
The speaker supports may be bent slightly to apply light
pressure against the bone and attain the best reception.
Figure
3
2.6
Attach PTT to Radio
2.6.1
Refer to Figure 4 and pull the top of the rubber
cover from the radio side connector and plug in the 2-pin
connector. The style of radio shown in Figure 4 is for
reference only; user’s radio may differ.
Figure
4
2.7
Turn ON radio, set volume to low, select
channel to radio frequency, and place radio in chest
holster or a pocket.
2.8
Temporarily clip the PTT switch onto a belt,
waistband, holster, or other convenient location that
allows easy access to (convenient pressing of) the
switch. NOTE: The clip on the back of the switch may be
rotated in 45-degree increments in any direction.
2.9
Test functions of the PTT, headset, and radio.
Adjust volume as required. Press the PTT switch to
transmit; release the switch to receive.
Alignment Groove
Alignment Ridge
PTT Switch
Headset Cable Connector
Retaining Ring
User provided radio
shown for reference.
Velcro® Fastener
Crown Strap
Microphone
Bone-Conduction Speakers
S
k
2-Pin Connector,
Radio to PTT Cable
Pin Connector Cover
