Clemas & Co Tornado D70Mini Bowser, Operator'S Manual

Page: 3 / 32

Tornado P1 Mini Bowser Tornado P4 Mini Bowser
Engine Honda GX120 Engine Honda GX 340 11HP 360rpm
Pump RSV 3G25D Pump AR RK
Ͳ
15.20H
Pressure 1500 PSI Pressure 2900psi / 200Bar
Flow 9lpm Flow 15 lp, / 3.3gpm
HP Nozzle 25045 HP Nozzle 2505
Gearbox None Gearbox 2:1 reduction
Unloader Integrated Unloader Gymatic 3B ARGM3B250
Pump Oil 10W/40 Pump Oil 10W/40
Gearbox Oil N/a Gearbox Oil EP90
Noise
Tornado P2 Mini Bowser Tornado D70/ES
Engine Honda GX200 Engine Yanmar L70
Pump AR XT13
Ͳ
12 Pump ARXT13.12
Pressure 2200 PSI Pressure 2900PSI
Flow 13 lpm Flow 13 lpm / 3.3gpm
HP Nozzle 25045 HP Nozzle 2505
Gearbox 2:1 Reduction Gearbox 2:1 Reduction
Unloader ARMM4B Unloader ARGM3B250
Pump Oil 10W/40 Pump Oil 10W/40
Gearbox Oil EP90 Gearbox Oil EP90
Noise
Tornado Electron
Motor 24v DC HP Nozzle 15045
Pump ARXT11
Ͳ
14 Unloader ARMM4B/C
Pressure 1200 PSI
Flow 11 lpm Pump Oil 10W/40
Battery 2 x 140 amp/hour AGM Sealed Batteries
Microprocessor Controlled Automatic Battery Charger
24Volt 12.5 AMP
Technical Specifications
Important—New P2 Machines
Each new P2 machine will be set at 2000psi as opposed to 2200psi until the machine has
been run for approx 2
Ͳ
3 hours continuously.
Once the machine has been run then the pressure can be adjusted to achieve the maximum
2200psi by turning the pressure regulating valve until its fully open.