Clemas & Co TENNANT T581 MICRO RIDER, Operator'S Manual

Page: 58 / 114

EN
Ź 6XFWLRQEXWWRQ¿JUHI
: during operation with the AUTO, ECO or APC programs,
starts/stops the suction motor; outside of these programs, starts the suction motor in ma-
nual mode, lowering the squeegee.
Ź :DWHUGHWHUJHQWEXWWRQ¿JUHI
: during operation with the AUTO, ECO and APC
programs, starts and stops (holding the button for two seconds) delivery of water/deter-
gent; outside of these programs, starts/stops delivery in manual mode. In the AUTO pro-
gram, the quantity of water/detergent can be adjusted by pressing the button; each time
the button is pressed, the set level increases, Lev1, Lev2,..... Lev Auto (delivery proportio-
nal to travel speed).
If the AUTO program is active, setting the delivery parameter will exit the program and
activate manual mode.
Ź
CHEM-DOSE (accessory) : pressing the “water/detergent” + “brush” buttons together ac-
WLYDWHVGHWHUJHQWTXDQWLW\DGMXVWPHQWPRGHRQFHWKHFKHPLFDOV\PEROÀDVNLVVKRZQ
on the display, pressing the “+” and “-” buttons adjusts the level, from OFF to 0.2%, 0.3%
etc. up to 7%.
Ź %UXVKEXWWRQ¿JUHI
: inside the AUTO, ECO and APC programs, starts/stops the
brushes; outside of these programs, starts/stops operation of the brushes in manual mode.
In the AUTO program, pressing and holding the button (for two seconds) activates brush
pressure adjustment mode; pressing the “+” and “-”buttons performs the adjustment, from
1 to 5 (VERSION WITH TWO BRUSHES ONLY). Setting the parameter exits the program
and activates manual mode.
Ź $WWDFKUHOHDVHEUXVKHV³&/,&.212))´¿JUHI
used to automatically attach
and detach the brushes. Pressing the button once after starting the machine releases the
brushes, pressing it a second time activates automatic brush attachment. The button is
only active when all the functions are deactivated (suction motor and brushes); the same
button can be used to navigate the
“Technical Menu”. .
6
7
8
1
9 10 11
2
3
4
5
12
22