31
7.2.2
Replacing the motor filter
1.
Turn off the i-move 2.5B® with the ON/OFF
switch (Figure 24, pos 1).
2.
Place the i-move 2.5B flat on an horizontal
surface.
3.
Turn the filter housing (Figure 24, pos 2)
counterclockwise to remove it from the
bottom of the i-move 2.5B.
4.
Remove the old motor filter
(Figure 25, pos 1) from the filter housing.
5.
Place the new motor filter (Figure 25, pos 1)
in the filter housing (Figure 25, pos 2).
6.
Turn the filter housing (Figure 24, pos 2)
clockwise to replace it in the bottom of the
i-move 2.5B.
Figure 24
Figure 25
