Cleform 600CM Operating Instructions & Parts List Manual Download Page 2

1

TO THE OWNER:

This owner’s manual provides the information needed to operate and maintain this Gilson
mixer. Carefully read and follow all safety and operating instructions in this manual.
Also, be sure every operator of this mixer reads this manual before operating the mixer.
The replacement of any part on this mixer by other than the manufacturer’s authorized
replacement part may adversely affect the performance, durability or safety of the
product.
Be sure safety precautions are observed.  Read and follow all safety and operating
instructions in this operator’s manual.
The manufacturer reserves the right to make changes on, or add improvements to its
product at any time without prior notice or obligation.  The manufacturer reserves the
right to decide, upon its sole discretion and at any time, to discontinue a product.
Information regarding operation and maintenance of the engine can be found in a
separate engine manual supplied with this mixer if the mixer is supplied with an engine.
The engine manual provides all the information required regarding engine adjustments,
operation and maintenance.  Should any questions arise concerning engine operation or
service, contact the nearest engine repair facility or the engine manufacturer.

NOTICE: 

Record the model and serial numbers of the mixer (located on

the nameplate) in the spaces provided.  Engine model, type and code numbers are
located on the blower housing, cylinder head or  backplate.

Product Model Number:  ______________________________________________

Product Serial Number: _______________________________________________

Engine/Motor Model Number:  _________________________________________

Engine/Motor Code Number:  __________________________________________

Purchase Date:  ______________________________________________________

Dealer Purchased From:  ______________________________________________

Dealer Address: ______________________________________________________

____________________________________________________________________
____________________________________________________________________

Dealer Phone Number:  ________________________________________________

Summary of Contents for 600CM
















Reviews: