12
P2291BA | 2020-05
Apex Tool Group
5
EN
5
Product description
•
Sturdy, brushless motor with resolver. Shutoff is
torque/angle-controlled.
•
LCD display with information on status, torque, and
angle.
•
Green OK and red NOK LED display provides informa-
tion about current fastening result.
•
LED lighting makes it possible to find the screw point
quickly.
•
Clockwise/counterclockwise rotation
•
Fastening parameters are set with the controller or a
PC.
•
An exchangeable memory module (LiveWire Memory
Chip) allows the quick exchange of identical tools,
without changing the parameters.
•
Depending on the type, data is transmitted between
the control and the tool via
-
Infrared (IrDA)
-
WLAN
•
Built-in acoustic signal.
•
The
Stay alive
function of 15 seconds, prevents a
restart during the battery change and thus saves time.
The LEDs flash during this process (buffer mode).
0
5.1 Operation elements
5.1.1 Function keys
Left function key
<F1>
Right function key
<F2>
5.1.2 Start button
Depending on the setting, the start button has three func-
tions:
•
It activates the LED lighting.
Press the start button halfway down and hold it.
•
It starts the motor, the LED light goes out.
Press the start button all the way down.
•
It activates the barcode scanner.
Press the start button all the way down.
Item
Designation
<F1>,
<F2>
Function keys
2
LED display
3
Start button
4
Reverse switch
5
IrDA (infrared interface port)
6
Set torque – stick-on marking foil
7
LED lights for fast location of the fastening
position
10
7
11
12
3
2
2
4
<F2>
<F1>
5
6
9
13
9
LCD display with information on torque,
angle, and status
10
Platform; 47BAYP(…) illustrated
11
Wireless module
12
LiveWire Memory Chip (LMC)
13
Power supply; battery pack 26 V illustrated
<F1>
Function
Press once.
•
Confirm error message
.
•
Programmable: Depending on
how the key is programmed,
actions can be carried out by
pressing it briefly.
Press for two
seconds
•
Exit menu
<F2>
Function
Press until the
display shows
the
Main
menu
(refer to
9.3.4 Adminis-
tration sub-
menu,
page 24).
•
Activate menu.
Press for two
seconds
•
Select functions, if menu is acti-
vated.
Alternatively, the start button can
be pressed.
Item
Designation
