Apex Tool Group
P2260JH | 2019-05
15
Installation – Local network
6
EN
Settings on service PC
How to set up the different access points is described below. Please continue with the relevant chapter:
•
6.1.1 Setting up Siemens SCALANCE W788-1 access point (pre-configured), page 15
•
6.1.2 Setting up Phoenix FL WLAN 1100 access point, page 19
•
6.1.3 Setting up Siemens access point with unknown IP address, page 22. If an access point is to be re-
commissioned after a factory reset or with an unknown configuration.
6.1.1
Setting up Siemens SCALANCE W788-1 access point (pre-configured)
Please refer to the description in the scope of and the online help.
1. Select
Control panel > Network and Shar-
ing Center > LAN Connection > Properties
> Network > Network Card > Properties
.
2. Define IP address
192.168.0.XXX
.
For
XXX
, DO NOT select
50
(IP address of
access point).
Suggestion:
-
IP address 192.168.0.55
-
Select subnet mask
255.255.255.0
.
