Apex Tool Group
P2544PM | 2021-02
19
3
EN
3.6.2
Selecting the direction of rotation
>
>
Fig. 3-8: Submenu – Selecting the direction of rotation
Batch display
Enter the number of tightening positions for a FastApp.
Start speed display.
Enter the start speed.
Advanced settings.
Block Angle Detection activated.
If block angle detection is enabled, a block angle of 180° is added to torque/angle shut-
off. This block angle is used at the start of rundown, to detect if screw is already tighten
or thread/screw damaged or crooked screwed-in. The angle counting starts after the
block angle.
So if within that first 180° the torque exceeds the shutoff-torque (torque shutoff) or max-
imum torque (angle shutoff), the rundown is aborted and the "BLOC" error is show.
Block Angle Detection disabled.
Reset FastApps.
Button
Description
Bl
Bl
Button
Description
Direction of rotation, right-hand thread.
Direction of rotation, left-hand thread.
1
1
