10
P2121BA/EN 2014-06
2123b_1_5_en_ bedingt.fm, 03.07.2014
Before initial operation
4
Oils according to DIN 51524 / ISO 3498
4.2
Change air inlet: top / bottom (only on 20PTHHA)
When delivered, the air inlet is at the BOTTOM and sealed with a screw plug. To change the air supply from
top to bottom:
Remove the air strainer from the air inlet at the TOP (do not discard), see 9.2 Pistol grip 20PTHHA…,
page 32, Detail
X
.
Remove screw plug from BOTTOM. When doing this, counterhold with wrench (WAF 17).
Seal the air inlet at TOP with screw plug in accordance with specifications.
4.3
Connect the tool
Connect the tool to the compressed air line.
Maximum screwing-in torque = 40 Nm. Reaction torque at flat end. Counterhold with wrench (WAF 17).
Activate compressed air: 620 kPa in anticlockwise rotation.
Regulator
To attain constant work results, the working pressure must be kept
constant for every individual tool.
Lubricator
Compressed air requires a small amount of oil and is orientated to
the air consumption of the tool.
Calculate the time (
T
) between two drops of oil and make the
following settings at the lubricator:
F
= Factor for pulse shut-off nutsetter = 4
L
= Air consumption of tool at idle m³/min
(see performance data for pulse shut-off nutsetter)
Order no.
Packaging
unit
Liter
Name
ARAL
BP
elf
ESSO
INA
Mobil
Klüber
SHELL
933090
2
HL32
Aralub
EE 100
Energol
HL 32
Polyelis 32
Olna 32
Nuto
H 32
Hydraol
32A
D.T.E.Oil Light
Vactra Oil Light
Crukolan 32
Molina 32
Molina 22
CAUTION!
The air hose can come off by itself and whip around uncontrollably.
Shut off the compressed air before making the connection.
Device
Explanation
T
60
F
L
-------------
=
