CAUTION!
Make sure the seat is fully locked onto the seat post before
sitting.
Freewheel Lever
The Freewheel lever on the scooter is located on the rear section of the
scooter. Before driving the scooter needs to be put into the drive position. The two
positions are:
Drive position - is indicated by ‘Closed’ - pull the lever backwards for this
position.
Fig 6.7.1.
Freewheel position - is indicated by ‘Open’ – push the lever forwards for
this position.
Fig 6.7.2.
Fig 6.6.1
Fig 6.7.1 Drive Mode
(Closed)
Fig 6.7.2
Freewheel Mode (Open)
Fitting Seat
Stand behind the scooter and with both hands lower the seat onto the seat
post making sure the seat is straight above the seat post. If the seat is not
straight on the seat post you will not be able to fully lock the seat. Make
sure seat has fully locked onto seat post.
Fix arm rests and adjust to the required width, then tighten arm rest retain-
ing screws securely.
See Fig 6.6.1.
14