in.stream TechBook
7
Mount on a horizontal or vertical surface
The instream system should be installed on an even
horizontal or vertical surface
Whether horizontal or vertical, this unit should be
installed at a location above the flood level of the spa
Do not install instream in
the upright position as
illustrated above
To install the ink113 single switch, select the most
appropriate location for the control switch and drill a
7/8" (22 mm) hole Insert control switch into the hole
Tighten the nut to attach firmly (see illustration)
Installation of in.k113 single switch
7/8"
22 mm
Nut
