
2
①
Loosen the screws of the
upper cover and side panel.
Remove the cover.
②
Fix four screws in the HDD
(Turn just three rounds).
③
Place the HDD in accordance
with the four holes in the bottom.
④
Turn the device upside down and
then turn the screws in firmly.
⑤
Connect the HDD cable and
power cable.
.
⑥
Put the cover in accordance
with the clip and then place the
upper cover back. Secure the
screws in the rear panel and the
side panel.
1.5
Front Panel
The front panel is shown as below. See Figure 1-1.
Figure 1-1
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or
shut down DVR.
Shift
Shift
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Up/1
Down/4
、
Activate current control, modify setup, and then move up and
down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Left/2
Shift current activated control,
Summary of Contents for Panther-16HP
