background image

Page:

CLEaRVIEw TowIng MIRRoRs CV-LR-D34-EB / CV-LR-D34-IEB

4 oF 4

HOW-TO INSTALL

Atlantic British Ltd. is the Exclusive Distributor of Clearview Mirrors for North America

http://www.roverparts.com/Brand/Clearview-Towing-Mirrors/ • 800-533-2210

11.

 Install the New Clearview Towing Mirror, 

guiding wiring through opening and secure the 
top bolt, first, to hold. Then, secure bottom 2 
bolts with 10mm socket.

12.

 Plug in the connector. The Mirror is now  

installed.

13.

  Reverse to process to reinstall door panel.

Now use the process again to install the  
opposite mirror. Done!

10.

  Remove original mirror, snaking connector 

harness through the opening.

Summary of Contents for CV-LR-D34-EB

Page 1: ...ment towing mirrors and should be your next upgrade if you re doing any repeated towing with your Land Rover LR3 HOW TO INSTALL Atlantic British Ltd is the Exclusive Distributor of Clearview Mirrors for North America http www roverparts com Brand Clearview Towing Mirrors 800 533 2210 1 First the door panel must be removed to access the side mirror connector Using a pocket screwdriver pry the Land ...

Page 2: ...ica http www roverparts com Brand Clearview Towing Mirrors 800 533 2210 3 Remove the cover on the door panel arm rest using a pocket screwdriver 5 Remove the two philips head screws at the bottom of the door tray 4 Remove the 4 screws that are revealed 2 Behind the door handle pry off the small round cover using a pocket screwdriver to reveal a screw Remove screw ...

Page 3: ...rors for North America http www roverparts com Brand Clearview Towing Mirrors 800 533 2210 7 Pop off the door panel leaving everything connected 9 Run out the three bolts holding the mirror in place taking caution to support the mirror so not to drop it 8 Now you have access to mirror connector which you will disconnect 6 Loosen speaker housing ...

Page 4: ...ing Mirrors 800 533 2210 11 Install the New Clearview Towing Mirror guiding wiring through opening and secure the top bolt first to hold Then secure bottom 2 bolts with 10mm socket 12 Plug in the connector The Mirror is now installed 13 Reverse to process to reinstall door panel Now use the process again to install the opposite mirror Done 10 Remove original mirror snaking connector harness throug...

Reviews: