20
Figure 2-16
After completing all the setups please click save button, system goes back to the previous menu.
2.8.2 PTZ Operation
In one window display mode, right click mouse (click “Fn” Button in the front panel or click
“Fn” key in the remote control). The interface is shown as in Figure 2-17.
Figure 2-17
Click Pan/Tilt/Zoom, the interface is shown as below. See Figure 2-18.
Here you can set the following items:
z
Step: value ranges from 1 to 8.
z
Zoom
z
Focus
z
Iris
Click icon and to adjust zoom, focus and iris.
Figure 2-18
In Figure 2-18, please click direction arrows (See Figure 2-19) to adjust PTZ position. There are
total 8 direction arrows. Please note system only supports up/down/left/right four directions if you
use the front panel to control the direction
The speed value ranges from 1 to 8.
