CLEARSPAN
™
CARPORTS
10
Revision date: 12.10.07
Interior Rafters
1. Select the tubing for the
first interior rafter assembly
and position it on the ground as previously described.
2. Install a 4-way square tube fitting (#104627) in the
locations shown in the diagram below and secure the
joints using Tek screws.
IMPORTANT:
To prevent damage to the cover, install
Tek screws so the heads do not contact the roof panels
when these are installed.
Medium Frame Only
: Connect the lower rafter legs
using the 1.75" x 1.75" square tube insert (#104075).
(See the Base Rail assembly steps if needed.) Place
the insert 8" into the rafter pipes and secure using Tek
screws.
3. Repeat the steps for all remaining interior rafters.
4. Once all rafter assemblies are complete, continue with
the
Frame Assembly
instructions that follow.
RAFTER ASSEMBLY (continued)
Space below is reserved for customer notes.
Medium Frame Only
