Step 5:
Fasten both pipes with two 1/2" pipes straps each using self-drilling pan head screws; no
pilot hole is needed. Trim excess PVC pipe.
Step 6:
Lift one side of roof and slide in the 68" leg poles. Then lift the other side and insert the
remaining leg poles. (Note illustration below may not match your frame exactly.)
Legs
Step 7:
Create pipe sections
as diagram illustrates
.Connect these sections with
c
ouplers as
shown. Slip a leg pole into each bottom coupler.
52"
52"
27"
68"
90° Corner Coupler
Bottom Tee
Leg
Pole
Page 7
