ClearSounds CS-A55 User Manual Download Page 18

18 – ENGLISH

19 – ENGLISH

fCC WANTS YOU TO KNOW

Your  new  product  has  been  registered  with  the  Federal  Communication 
Commission (FCC). This product complies with standards in Part 68 of the FCC 
Rules. The FCC requires us to provide you with the following information

:

Connection and Use with the Nationwide Telephone Network

The FCC requires that you connect your product to the nationwide telephone 
network through a modular telephone outlet or jack. The modular telephone 
outlet or jack to which the telephone must be connected is a USOC RJ-11C or 
RJ-11W. This equipment may not be used with Party Line Service or with Coin 
Telephone Lines.

Notification to the Telephone Company

The  FCC  requires  that  upon  request  of  your  local  telephone  company,  you 
provide the following information: a) The “line” to which you will connect the 
telephone  equipment  (that  is,  your  phone  number),  and  b)  The  telephone 
equipment’s FCC registration number and ringer equivalence number (REN). 
These  numbers  are  on  the  back  or  bottom  of  your  telephone  equipment. 
The REN is used to determine how many devices you may connect to your 
telephone line and still have them ring when your telephone line is called. In 
most, but not all areas, the sum of all REN’s should be 5 or less. You may want 
to contact your local telephone company.

Repair Instructions

If it is determined that your telephone equipment is malfunctioning, the FCC 
requires that it not be used and that it be unplugged from the modular outlet 
until  the  problem  has  been  corrected.  Repairs  to  the  telephone  equipment 
can only be made by the manufacturer or its authorized agents or by others 
who may be authorized by the FCC. For repair procedures, follow instruction 
outlined under the “

Limited Warranty

”.

Rights of the Telephone Company

If  your  product  is  causing  harm  to  the  telephone  network,  the  telephone 
company  may  temporarily  discontinue  your  telephone  service.  If  possible, 
they’ll notify you before they interrupt service. If advance notice isn’t practical, 
you’ll be given the opportunity to correct the problem, and you will be informed 
of your right to file a complaint with the FCC notified as soon as possible. Your 
telephone company may make changes in its facilities, equipment, operations, 
or procedures that could affect the proper functioning of your product. If such 
changes are planned, you will be notified

.

Interference Information: Part 15 of fCC Rules

Some telephone equipment generates, uses, and can radiate radio-frequency 
energy and, if not installed and used properly, may cause interference to radio 
and  television  reception.   Your  product  has  been  tested  and  found  to  meet 
the standards for a Class B digital device, as specified in Part 15 of the FCC 
Rules.  These  specifications  are  designed  to  provide  reasonable  protection 

cS-a55-TriLingual.indd   18

5/28/08   9:10:32 aM

Summary of Contents for CS-A55























Reviews: