9
Setting Up
The telephone requires four good quality AAA batteries. These
are not supplied with your telephone. Carefully remove the
battery compartment cover-found on the underside of the
telephone base. Check the battery polarity diagrams when
inserting the batteries. Fit the battery cover back on.
Connect one end of the curly cord to the handset. The other end
of the curly cord plugs into the jack on the left hand side of the
PHOTOPHONE 300 unit marked
. Place the handset on the
cradle.
Connect the line cord to the socket located at rear of telephone
then connect the plug into the wall socket**.
For the LCD display, backlight and other special features you
must insert the power adapter (batteries act as a backup in case
of power failure).
Connect the power adaptor to the jack located
at the rear of the telephone marked DC9V then plug the other
end into a 13amp wall socket (*). Please choose a socket near
your telephone to enable you to unplug the mains power quickly in
case of a problem.
(*) Classified “hazardous voltage” according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
INSTALLATION