2
t
EChnICal
s
uPPort
: 800.283.5936
Connections
The VIEW Pro E120 Encoder has the following input and output connectors on the back of the unit.
•
1x - IR Input connector compatible with SteamNet IR sensor (3.5mm)
•
1x - IR Input Receiver window on front panel
•
1x - IR Output connector compatible with SteamNet IR emitter (3.5mm)
•
2x - Balanced Audio Input (Two Modular Phoenix-type connectors, left and right)
•
3x - GPIO (General Purpose Inputs - Digital, 0/5V, Phoenix-type)
•
3x - GPIO (General Purpose Outputs - Latching, Relays, Phoenix-type)
•
1x - Stereo 3.5mm Barrel Plug (Line Level) Input
•
1x - Stereo 3.5mm Barrel Plug (Line Level) Output (Currently not used)
•
2x - HDMI-input connectors.
•
2X - RS-232 DB-9 connector
•
2x - RJ45 10/100/1000 Mb Ethernet jack (Use only jack 1)
•
3x - USB connectors (one USB connector on front panel not visible)
•
1x - 19V DC Power Connector
INPUTS AND CONNECTIONS
The E120 transmits the digital video and audio on the network.
s
tatus
lED
An LED on the front panel lights up when the unit is powered and to report status:
•
Off=Off
•
Yellow=Update process has started (e.g.: Update Devices)
•
Blue=Normal Operation
•
Green=System Startup/shutdown
•
Red=Error Condition
10/100/1000 E
thErnEt
J
aCks
The 10/100/1000 Mb Ethernet connector allows connection to TCP/IP networks setup to run
StreamNet. Only Port 1 (Red Jack) is supported. The other is a service port that MUST NOT be
connected.
