VIEW LITE EJ100 ENCODER
4
A.
LED
»
Power: Solid red indicates the unit is powered on.
»
Status:
•
Off (no light): Unit powered off, or in the boot process.
•
Blinking blue: Unit is disconnected from the EJ100 or
an active video source, or the network is down.
•
Solid blue: Unit is connected to the EJ100 and a video
stream is displayed.
B.
Mode Switch
: Set the mode for the RS-232 function. Under
the default Normal Mode, a RS-232 connection enables serial
command control of display or 3rd-party devices. Under Debug
Mode, it enables debugging.
C.
DIP Switch
: Routes audio and video together with IR, and USB
signals between DJ100 and EJ100 units. To route video from
a particular source to display, toggle switches on the EJ100 to
match the positions on the chosen DJ100. To unlink a EJ100
from an DJ100, reset the EJ100 factory defaults.
NOTE:
Before using the DIP switch, check that routing operations
are not performed by other tools. If they are, the switch function is
disabled. Press and hold the Reset Button to enable the switch.
CONNECTING THE EJ100 ENCODER
VIEW Lite EJ100 Front Panel
Power LED
Indicator
Status LED
Indicator
Mode
Switch
DIP
Switch
VIEW_Lite_EJ100_QSG.indd 4
8/22/2018 9:30:12 AM
