VERSA PRO CT
16
CONNECTING A CLEARONE BLUETOOTH MODULE
The BT EX (ordered separately) connects to the CONVERGE® Huddle by connecting to the P-Link Out on the
BMA CTH.
1.
Connect a RJ-45 cable to the back side of the BT EX.
2.
Connect the other end of the RJ-45 cable into the P-Link Out on the BMA CTH.
BLUETOOTH PAIRING
In devices that have near-field communication (NFC) capabilities, tap the BT EX face plate with the NFC-
capable device. This initiates a pairing between the device and the BT EX.
To pair a non-NFC device, perform the following steps.
1.
Push the reset/pairing button on the front of the BT EX face plate.
2.
In your Bluetooth-enabled device, navigate to your Bluetooth settings (e.g. for iOS users,
Settings > Bluetooth).
3.
Select “ClearOne Bluetooth XXXX” (XXXX indicates the last 4 digits of the MAC address).
When a device is paired, a short beep plays followed by a higher frequency beep.
When a device is unpaired, a short beep plays followed by a lower frequency beep.
