UNITE® 200 PTZ HD Camera
7
QSG-0128-002v1.2 September 2021
5
720p50
D
-
6
1080p30
E
-
7
1080p25
F
-
Start Up
1. If you are not using the PoE Splitter,
connect
the
AC power adapter
to a
power source
.
2. On the back panel of the UNITE 200,
set
the
Power Switch
to
On
.
When the camera starts, Pan-Tilt rotates to the maximum position of top right, then returns to the center position. This
completes the initialization process.
Note:
If the position preset 0 has been stored, then after initialization, the position preset 0 is called
up.
If you want to restore the factory default settings:
a.
Press
the
Menu
button to display the On-screen Display (OSD) menu.
b.
Select Menu
>
Restore Default
>
Restore
.
c. Set the value Yes, then press the
HOME
button.
IR Remote Control
Note:
Power consumption in standby mode is approximately half of the normal mode
Standby Button
• Press this button to enter standby mode.
• Press it again to enter normal mode.
Position Buttons - to set or call a present
Zoom Buttons
• Slow Zoom: Zoom In [+] or Zoom Out [-] slowly
• Fast Zoom: Zoom In [+] or Zoom Out [-] fast
More detailed information about using the UNITE 200 PTZ HD Camera is provided in the UNITE 200 User Manual,
available in the