4 TechSales StreamNet Design Help: 1.800.705.2103
IR/KeyLinX
- This drop-down menu lets you select from two models of KeyLinX (KL10X and
KL20X), one model of IRLinX (IRL1), and two combination models (for chaining an IRLinX off a
KeyLinX) (IRL1 & KL10X, and IRL1 & KL20X). The KL20X offer a microphone and a TALK button
for the IP intercom feature. The KL10X and KL20X provide an IRLinX port on the back panel.
KeyLinX or IRLinX connects to the Expansion Interface Module (EIM) port on a SpeakerLinX.
»
NOTE: The EIM splitter is required to install a KeyLinX or IRLinX. It is shipped in the
same box with the KeyLinX and IRLinX.
Speaker Model
- This option is designed for IP-Ready speakers which are specifically labeled
by your speaker manufacturer. Selecting this option loads the filter and crossover arrange-
ments designed by your speaker manufacturer into the signal processor of the SpeakerLinX,
thereby enabling greater performance out of your SpeakerLinX.
2. After completing the information, click
Save & Continue
.
C
onfiGurinG
the
SLX300
Adjust the settings for each SLX300 connected to the system by filling in the appropriate fields on
each of the tabs
.
(Refer to the Dealer Setup manual for complete descriptions of each tab and
field.)
The following examples show the screens used to configure the SLX300.
SLX300 Dealer Setup - Info Tab