Getting Started
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
7
To install USB drivers on a Mac
The USB Adapter is compatible with Mac OS 8.6 through 9.2.2.
1. Insert the Software and USB Driver Disk into the CD-ROM drive.
2. Double-click the ArcSoft icon to open the CD content window.
3. Double-click the USB Adapter 2.0 Installer icon.
4. Click
Install
. When the drivers are installed, restart the computer.
5. Plug the USB Adapter into a USB port on the Mac.
Getting Started
6
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Connecting the USB Adapter
To a video source
Use either a composite video cable or an S-video cable to connect the USB Adapter
to the video source such as a ClearOne camera or a VCR.
To a video monitor
Use a composite video cable to connect from the video pass-through jack on the
USB Adapter to the composite (RCA) jack on the TV, monitor, or other display
device. This connection allows you to view the video as it is recording.
To use the video pass-through connection, the connection from video source to the USB
Adapter must be composite. If you are using an S-video connection, you will not be able
to use the video pass-through option.
To an audio source
Use the stereo audio in jack to route an audio signal to the computer.
Audio
Composite
Video
S-Video
Video
Pass-Through
USB
Figure 7. Contents of USB Software and Driver Disk
Figure 8. USB Adapter connection diagram