2 |
P a g e
800-000-000-11 Rev 2.0
Date and Time:
It is important to set up your RoomRoster with the correct date and time for your location so
that the content from EZ-Stream will display as scheduled:
1. Press the ‘Menu’ key on the keypad.
2. Use the Arrow keys to navigate to TIME/DATE and press ‘Enter’.
3. Arrow down to SET TIME and press ‘Enter’.
4. Use the up and down arrow keys to set each digit of the time. Note that the time is in 24 hour time. When
finished arrow over to SET and press ‘Enter’.
5. Navigate to TIME/DATE again and go into the SET DATE menu. Again, use the up and down arrow keys to set
each digit in the date, starting with the month, then the day, and then the year.
The RoomRoster is now configured and ready to go.
III. Connecting the RoomRoster Player
The RoomRoster uses Power over
Ethernet, meaning that you only have
to run one Cat5/Cat6 cable to the unit.
This is accomplished using a PoE
Splitter that needs to be mounted
behind the RoomRoster unit. To
connect the PoE Splitter, do the
following:
1.
Connect the 3 pin power connector from the POE Splitter to the Power Input on the RoomRoster and set the
power switch to the on position.
2.
Connect the included ethernet cable from the “OUT” on the PoE Splitter to the Ethernet jack on the
RoomRoster.
3.
Connect the Ethernet cable coming from your Endspan or Midspan to the “IN” on the PoE Splitter. This cable
will be carrying Power and Ethernet combined.
Note:
If you received a Midspan from MagicBox, then the cable carrying combined Power and Ethernet will come
from the “PWR LAN-OUT” on the Midspan, and go to the “IN” on the PoE Splitter. The connection to your
network is plugged into the “LAN-IN” on the Midspan.
Contact Info
MagicBox
1600 SW Western, Suite #130
Corvallis, OR 97333
Sales:
541-752-5654
Support:
541-752-5542
Web:
www.magicboxinc.com