CAMERA CONTROL
The INTERACT system provides voice tracking capabilities through VISCA control port connection
to a PTZ camera. The camera presets are programmed in INTERACT Software and assigned to
each microphone pod. The INTERACT AT supports nine camera positions and a home position.
Camera Control Settings
To open the Camera Control window
l
With the camera connected, click the
Camera Controls
button on the configuration window.
To set camera presets
1. Select the
Camera Control Mode
, either Sony or Cannon.
2. If you have more than one camera, select which camera you are programming.
3. Select the
Camera Delay
. Camera delay is the amount of time the microphone must be acti-
vated before the camera moves to the preset position.
4. Select
Voice Tracking System Enabled
.
5. Using the directional arrow buttons and the Zoom In and Out buttons, position the camera
for the first microphone pod.
6. Click
Save Preset
under the microphone pod to assign the camera position to the micro-
phone.
7. Repeat steps for the second and third microphones.
To test camera presets
l
Click
Run Preset
to test the preset programming for the microphone pod.
- 28 -
Summary of Contents for interact 8i
Page 1: ...INTERACT PRO AT 8i USER S MANUAL 1...
Page 68: ......
