5
t
echnIcal
s
upport
: 800.283.5936
You will also need the MAC Address of each NS-MNE device (printed on bottom of the unit)
d
IscoverIng
and
c
onfIgurIng
the
ns-Mne u
nIts
The MNE_Finder application running on a PC connected to the network discovers any NS-MNE units
that are connected via the local Ethernet even if their current IP address settings are incompatible
with those of the PC running the program.
r
unnIng
Mne_f
Inder
Make sure each NS-MNE unit is powered on and connected to the Ethernet network via its Ethernet
port.
On a PC running Windows connected to the same Ethernet network, run the MNE_Finder.exe
program. The program automatically discovers and shows a list of all connected NS-MNE units
along with their current IP address, MAC address, and firmware revision.
If you need to repeat the discovery, press the “Refresh List” button.
ConfIgurIng wITH Mne_fInder
To configure, perform the following:
Identify the NS-MNE unit you will configure by the MAC address that is listed by the MNE_
1.
Finder.
Select it then click the
2.
Configure IP settings
button.
