Audio Performance
Conditions: Unless otherwise
specified, all measurements
are performed at 1 watt with a 1 kHz signal.
Line Inputs
Connectors: XLR Balanced or 1/4” balanced input
Frequency Response: 20 HZ - 20 kHz
Maximum Input Level: 17 dBu
Impedance: 10 KΩ
Outputs
Amplifier Output: 250-Watts/Channel into 8 Ω
Frequency Response: 20 HZ - 20 kHz
Channels: 2-Channel
Connectors: Binding Post or SpeakOn®
Impedance: 8 Ω
THD+N <.05% at 1 Watt
SMPTE IMD <.1% from 60 HZ to 7 kHz
Dynamic Range >100 dB
Damping Factor: 180
Crosstalk >65 dB
Protection Features
Thermal Shutdown
Current Limiting
Other
Parallel or Stereo Impedance Switch
Clip, Presence, Fault Indicators
Front Panel Gain Controls
Front Panel On/Off Switch
CONVERGE
PA 2250
dATA SHEET
<
>
CONVERGE
PA 2250 BACK PANEL
>
SPECIFICATIONS
>
CLEARONE LOCATIONS
Headquarters:
Salt Lake City, UT USA
5225 Wiley Post Way
Suite 500
Salt Lake City, UT 84116
Tel:
801-975-7200
Toll Free: 800-945-7730
Fax:
801-977-0087
Latin America
Tel:
801-974-3621
EMEA
Tel:
44 (0) 1189 036 053
APAC
Tel:
801-303-3388
Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne’s products. All rights reserved. Information in this document subject to change without notice
.
© 2008 ClearOne Communications Inc. 802-151-950 Revision 1.0. June, 2008.
Power
910-151-950 (US Version)
120 VAC; 60 Hz, 5.0 Amp max
910-151-951 (EU Version)
240 VAC; 50 Hz 2.5 Amp max
Operating Temperature
75 C° ambient unit temperature
Humidity
15 to 80%
dimensions (L x d x H)
18.89” x 18.58” x 3.46” (2 RU)
47.98 x 47.19 x 8.78 cm
Weight
37.5 lbs/17 kg unit weight
Compliance
FCC Part 15 Subpart B
EN 55103-1 55103-2
EN 60065
RoHS
WEEE
Part Number
910-151-950 Converge PA 2250 (US Version)
910-151-951 Converge PA 2250 (EU Version)
Asia-Pacific Support Center
Tel:
852-3590-4526