20 Beamforming Microphone Array
WALL MOUNTING PROCEDURE
The wall mounted Beamforming Microphone Array must be placed on a wall facing the
intended conference participants. It can be placed below a video conferencing system such as
COLLABORATE, or in audio-only applications, at eye level with the participants. The face of the
Beamforming Microphone Array should be about 8 to 10 feet from the participants.
»
NOTE: Wall mounting MUST be strictly horizontal and with the “C” logo on the left-
hand side to assure proper adaptive steering of audio pickup.
The Ceiling/Wall Mounting Plate is designed with small studs projecting from the plate which fit into
slotted holes on the Mic Mounting Plate to hold the Beamforming Microphone Array to the wall.
1-1/2"
1-1/2"
WALL MOUNT
CUT-OUT
This page can be used as a template for the cut-out
.
The Ceiling/Wall Mounting Plate is designed to be mounted to either a solid or hollow wall so the
fasteners used to attach the plate to the wall must be appropriate to the wall material to be secure.
Hollow wall mounting gives the advantage of concealed cable routing. Use the following dimensions
for the cable pass-through cut-out for a hollow wall mounting:
Studs on
Ceiling/Wall
Mounting Plate
Slotted holes in
Mic Mounting
Plate
