FlexCam iCam Digital
— Appendix
25
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
FlexCam iCam Digital
— Appendix
24
Standard(s) to which Conformity is declared:
89/336/EEC "Electromagnetic Compatibility (EMC) Directive":
EN 55022: 1994 (Emissions)
Specification for limits and methods of measurement of
radio interference characteristics of information
technology equipment
EN 61000-3-2:1995/A1/A2:1998
Part 3: Limits - Section 2: Limits for harmonic current
emissions.
EN 61000-3-3:1995 Section 3:
Limitation of voltage fluctuations and flicker in low
voltage supply systems for equipment with rated current
up to and including 16 A
EN 55024: 1998 (Immunity)
Information technology equipment -
Immunity characteristics - Limits and
methods of measurement
EN 61000-4-2: 1995/A1:1998
Electrostatic Discharge
EN 61000-4-3: 1996/A1:1998
Radiated RF Immunity
EN 61000-4-4: 1995
Electrical Fast Transients
EN 61000-4-5: 1995
Lighting Surge
EN 61000-4-6: 1996
Conducted RF Immunity
EN 61000-4-11: 1994
Voltage Dips and Voltage Interruptions
73/23/EEC "Low Voltage Directive (LVD
)":
IEC 60950-1: 2003
Safety of Information Technology
Equipment, Including Electrical Business
Equipment
We, the undersigned, hereby declare that the equipment specified above conforms to the above
Directives and Standards.
Manufacturer
Signature
Roger J. Midgley
Full Name
Project Manager
Position
Legal Representative in Europe
Signature
Martin Offwood
Full Name
Managing Director EMEA North
Position
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
the product, or such other matters as it elects to honor this warranty as above provided. This
warranty does not cover damage to the product during shipping and the Manufacturer assumes no
responsibility for such damage. All shipping costs shall be paid by the customer.
This warranty extends only to the original end user and is not assignable or transferable. This
warranty is governed by the laws of the State of Utah, without regard to the conflicts of interests
provisions thereof.
ClearOne Communications Inc.
1825 Research Way
Salt Lake City, Utah 84119
FCC Part 15/ICES-003 Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules and Industry Canada ICES-003. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his/her own
expense.
Operation is subject to the following two conditions: (1) This device may not cause interference, and
(2) This device must accept any interference including interference that may cause undesired opera-
tion of the device.
Changes or modifications not expressly approved by ClearOne Communications could void the user's
authority to operate the equipment.
European Compliance
This equipment has been approved in accordance with Council Directive 1999/5/EC "Radio
Equipment and Telecommunications Equipment". Compliance of the equipment with the Directive is
attested by the application of the CE mark on the equipment.
EC Declaration of Conformity
Application of Council Directive(s):
1999/5/EC Radio equipment and Telecommunications
Terminal Equipment (R&TTE) Directive
Manufacturer's Name:
ClearOne Communications
Manufacturer's Address:
1825 West Research Way Salt Lake City, Utah 84119 U.S.A.
Model No.:
FlexCam iCam 910-171-101-PAL and
FlexCam iCam Digital 910-171-102-PAL
