Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]
10
CraftSmart
®
Test Access Point (TAP) Box
Installation Manual
_________________________________________________________
Manual 020016 REV A - Sept 2018
Cable Entrance
The TAP Box accepts a pushable fiber quick connect coupler. The coupler can be zip tied into place and duct inserted into
the coupler. Cable can then be fed through the duct and into the TAP Box.
If not utilizing a coupler, cut two perpendicular slits in the center of the black cable entrance plug, and feed the cable through
the plug. Then wrap the cable with grommet tape (foam tape) below the plug and secure it into place on the TAP Box with a
zip tie. Insert the plug into place on the TAP just above.
