ClearClick VT32, Quick Start Manual And User Manual

Page: 5 / 18

5
QUICK START
– Listening To Records
1. Plug the power adapter into the back of the turntable.
Plug the other end into any electrical outlet.
2. Switch the knob on the top of the turn
table to “PHONO.”
Turn on the power switch. The power LED will light up
red.
3. Remove the white plastic protective cover on the
turntable needle. Remove the black protective twist ties
on the turntable “arm”.
4. Place a record on the turntable and select the desired
speed (33/45/78) according to the record.
NOTE: If you are playing a 45 RPM record, use the
included 45 RPM adapter located in the holder near the
tone arm.
5. Open the tone arm clip to release the tone arm. Place the
tone arm onto the record. The turntable will begin to spin
after the arm is moved toward the record.
6. Turn the VOLUME CONTROL KNOB to adjust the
volume.
7. If the Auto Stop Control Switch is turned ON, the record
will stop automatically when finished. If Auto Stop Control
Switch is turned OFF, the record will NOT stop
automatically when finished.