User manual / Bedienungsanleitung
Made in Germany
Page / Seite 7
Now turn the level completely to the “+” side, to tighten the tonearm with the two (2) delivered
maggots screws (see pic. 4 + 5) on the side of the
VTA-Lifter
(2).
Pic. 4: Tighten the tonearm
2.3 Height adjustment
To adjust the height of the tonearm turn the level either to the
right side (marked with a “+”) to heighten the tonearm or to the
left side (marked wit a “-“) to reduce the height of the tonearm.
With the new
VTA-Lifter
(2) you can adjust the height even while
you are playing music.
Tighten the
VTA-Lifter
(2) with the delivered cylinder head bolts and the hex key wrench (3 x 8)
bottom side of the Champion – base (see pic. 8).
Now you can mount the Champion base on the turntable chassis.
To finish the installation please proceed further as described before.
Pic. 7: Mounting the
VTA-Lifter
in a Champion base
+
-
Pic. 5: Tighten the tonearm
to increase
to reduce
2.4. Installation on a Champion base
For the installation please remove the tonearm and the base from your turntable.
Fit the
VTA-Lifter
(2) from above through the hole of the base.
Pic. 6: Height adjustment
Pic. 8: Tighten the
VTA-Lifter
