Page 8
© clearaudio electronic GmbH 2016
TT1-MI
User manual
5. Mounting the
TT1-MI
tonearm on the
Master Innovation
turntable
Place the tonearm chassis on top of the two spacer discs. Lift it carefully, making sure that the
sliding tonearm bridge is positioned to the rear of both sliding bases as shown in picture 5.
While holding it in place insert the two large hex socket headed bolts provided (see page 4
package content No. 4) and tighten them (see picture 6).
Please note:
Always hold the tonearm in place while tightening the mounting bolts.
Pic. 5:
Placing the tonearm chassis on the spacer discs
Pic. 6:
Tightening the mounting bolts
8 mm
hex wrench
