User manual / Bedienungsanleitung
4
© clearaudio electronic GmbH, 2019-04
1. Contents
Please check all contents of your package:
1.
smart power 24V
2. IEC power cable
3. User manual
4. Warranty card / Quality card
2. Getting started
The Clearaudio
smart power 24V
is delivered in custom-designed
packaging. Please keep this packaging to ensure safe transportation if
needed.
Unpack the unit and place it at its desired location.
Connect the
smart power 24V
to the mains power supply with the supplied
IEC power cable. Then connect your turntable to the
smart power 24V
using the attached power cord, instead of the usual power supply.
To switch the
smart power 24V
on, use the switch on the rear side of the unit.
The
smart power 24V
will start automatically and displays following:
After completing the powering-up process, which takes approx. 20 seconds, the LCD display get
dimmed and the button will turn off. The unit is now in the output/off mode.
To activate the unit, press the button (approx. 5 seconds) till the button and the screen brighten up
and show the following screen:
Before using
smart power 24V
it is important to fully charge the internal batteries to
bring them to the optimum operating condition (see page 6, point 4.3, “Charging mode”).
Pic. 1: Main socket
clearaudio
loving music
|||| |||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| ||||| |||| |||| |||| ||||
0%
89%
100%
