Clearaudio Smart phono headphone V2, User Manual, Page: 3 / 16

User manual / Bedienungsanleitung
Made in Germany 3
- Setup –
Connect the ground of the turntable/tonearm to the
smart phono V2 / smart phono headphone V2.
To select either the MC (moving coil) or MM (moving magnet) mode of the
smart phono V2 / smart
phono headphone V2
according to your cartridge type, simply use the switches on the bottom side
(one each for left and right channels):
Position MM = button not pressed, Position MC = button pressed in.
MM Adjustment MC Adjustment
Now you can proceed with connecting the
smart phono V2 / smart phono headphone V2
to your
MC/MM cartridge and preamplifier. The input impedance (input load resistor / capacitance) can be
adjusted according to the cartridge requirements, using the jumpers on the bottom of the unit.
Finally, connect the power supply to the mains. For disconnecting, please follow these instructions
in reverse order.
Pic. 1: Adjustment MM / MC
150pf
250 pf
50R
100R
500R
1K0
5K0
Subsonic Off>ON
150pf
250 pf
50R
100R
500R
1K0
5K0
Subsonic Off>ON
Pic. 2.2: Basic Adjustment Pic. 2.3: Adjustment 500 Ohm
User manual / Bedienungsanleitung
Pic. 2.1: View from the bottom side
Pic. 3: Rear view