User manual / Bedienungsanleitung
Made in Germany
5
3. Set-up
Setting up the
concept active
turntable is easy.
The turntable chassis, tonearm and cartridge are already assembled and all key parameters have
been pre-adjusted and tested at the
Clearaudio
factory.
The
concept active
turntable needs a set-up space of at least 17 x 14 inches.
1)
First, take the
concept active
turntable chassis out of
the package and place it on a suitable surface.
Then, remove the drive belt from the plastic bag.
2)
Place the drive belt around the sub-platter and
around the motor pulley.
3)
Take the platter out of the package and carefully
place it with both hands onto the shaft.
4)
Carefully remove the adhesive security tape and
further security materials from the tonearm and the
cartridge.
Pic. 3:
Placing the drive belt
Pic. 5:
Removing the adhesive security tape
Pic. 2:
Placing the turntable
Pic. 4:
Mounting the platter
