Ambient
User manual
Seite 18
clearaudio electronic GmbH 2008
Azimuth adjustments are facilitated through the small (1,5 mm) Allen screw (red marked
screw) on the bottom side of the armwand where the headshell enters the carbon fiber.
Once you loosen this screw, you´ll be able to rotate the headshell a small amount in
either direction. Be sure to tighten the screw when done.
Wind the counterweight on the tonearm-tube. You can adjust the tracking force of your
cartridge by turning the counterweight (shown in the picture below)
(
green arrow =
more tracking force
/
red arrow = lesser tracking force
)
.
Pic. 20:
Azimuth adjustment
Pic. 21:
Adjustment of the tracking force
