Page 18 of 21
deleted.
Client Host Name
Enter the client host name. The Name field is limited
to 20 characters (only 5 appear in display)
MAC Address
Media Access Control (MAC) address. Enter the
MAC address of the device.
IP Address
Enter the IP address that you want assigned to the
MAC Address.
Enabled
Checking this box enables the lease reservation.
Be sure to click the Apply button once you have made changes.
FAQ
What are the minimum system requirements to be able to run the Clear Modem?
System Requirement Pentium II 300 MHz or better with minimum of 64MB RAM.
What operating systems are supported?
Operating Systems: Windows 2000/XP/Vista or Mac OS 8 or higher
Why my Modem is not working?
Make sure the modem’s power adapter is plugged into an active power outlet.
If you are using a power strip or surge protector, make sure its switch is in the “ON”
position.
Make sure the round end of the power adapter is firmly connected to the modem’s power
jack.
Make sure you are using the power adapter that came with your modem. The correct
adapter for the Clear Modem Series G provides output power of 12V AC at 2 Amp.
If you still see no lights, call Clear Care at 888-888-3113.
Why can’t I log on to the Modem?
Check that the Ethernet cable is properly connected to the Clear Modem and the
computer.
Why can’t I connect to the Internet?
Check the Clear Modem connection status from the Web Interface; refer to the
Connection Status section to verify the connection status.
If the Clear Modem connection is down, and the gateway has not received an IP for 5 to
10 minutes:
- Reset the Clear Modem using the reset button.
