5 Pentz EF5 Installation Guide
© Clear Vue Cyclones 2018
Specifications
6” Intake
8” Intake
System Performance
1,701 CFM at baseline static pressure
of 2.25”
1,935 CFM at baseline static pressure
of 2.25”
Footprint with Filters*
52” x 21-½”
52” x 21-½”
Footprint without
Filters*
45” x 21-½”
45” x 21-½”
Minimum Height**
107”
107”
Weight with Filters
Single Phase – 234 lbs
Three Phase – 284 lbs
Single Phase – 234 lbs
Three Phase – 284 lbs
Weight without Filters
Single Phase – 190 lbs
Three Phase – 240 lbs
Single Phase – 190 lbs
Three Phase – 240 lbs
Cyclone Construction
16 ga rolled black metal steel, powder
coated
16 ga rolled black metal steel, powder
coated
Blower Assembly
16” steel, backward-inclined impeller
16” steel, backward-inclined impeller
Cyclone Diameter
18”
18”
Intake Size
6” ID w/QF rolled edge (sized for
Nordfab ducting) – adapters available
8” ID w/QF rolled edge (sized for
Nordfab ducting) – adapters available
Intake Angle
Upward, 9°
Upward, 9°
Country of Origin
USA
USA
Assembly Time
2 hours, with 2 people
2 hours, with 2 people
Motor:
Manufacturer
Leeson Motor Company
Leeson Motor Company
HP Rating
5 HP, non-TEFC
5 HP, non-TEFC
Speed
3,450 rpm
3,450 rpm
Current
Single Phase – 20.8 FLA at 230V
Three Phase – 12.2 FLA at 230V
6.1 FLA at 460V
Single Phase – 20.8 FLA at 230V
Three Phase – 12.2 FLA at 230V
6.1 FLA at 460V
Manual Overload
Protection
Yes
Yes
Electrical:
Minimum Circuit Size
Single Phase – 30 amps
Three Phase – 15 amps at 230V
10 amps at 460V
Single Phase – 30 amps
Three Phase – 15 amps at 230V
10 amps at 460V
Min. Recommended
Wire Size
10 gauge
10 gauge
Remote
RF
RF
Remote Range
60’
60’
Filters:
Manufacturer
Wynn Environmental
Wynn Environmental
Model #
9B300NANO
9B300NANO
Material
100% Nanofiber laminate
100% Nanofiber laminate
Area
300 sq ft each
300 sq ft each
Separation Efficiency
99.999% at 0.5 micron
99.999% at 0.5 micron
MERV Rating
15
15
Dimensions
12.75” OD x 34” H x 8.4” ID
12.75” OD x 34” H x 8.4” ID
* Dimensions based on intake positioned 180° from exhaust. Depth/width will vary depending on rotation.
** Height with 30-gallon drum. Add 6” for 55-gallon drum. A minimum of 6” of additional height is recommended for installation
purposes.
