Step
5: Assemble the
IFP
and
brackets
with
right screw (As shown in figure 5).
Make sure the brakes are locked. This step requires at least two professional to complete.
( figure 5)
Step
6: Hang the
IFP onto the wall mount with the fastened brackets
,
and lock the safety screw (As shown in figure 6).
(figure 6)
Summary of Contents for FIXM-V2
Page 3: ...Step 1 The underframe B is fixed with the base A As shown in figure 1 figure 1...
Page 4: ...Step 2 Lock the underframe and the base As shown in figure 2 figure 2...
Page 6: ...Step 4 Install wall mount on the column As shown in figure 4 figure 4...
Page 9: ...Step 8 After installation as shown in figure 8 figure 8...