2
|
INSERT BEAM LOCK
Adjust BLADE cable tray to approximate width of surface. Insert
the screw through the overlapping beam slots and into the black
plastic piece. Slightly tighten the screw with only a few turns.
DO
NOT
fully tighten.
1 | ATTACH CABLE TRAY HANGERS AND END CAPS*
Align slots on the cable tray and secure with 2 bolts from the
bottom. These hangers will mount to a blade workstation. Insert
Beam Grommet Covers.
*NOTE: End Caps (BTEC) are optional, follow the same install
process with or without end caps.
C
A
B
L
E
T
R
AY
O
P
T
IO
NAL
4
Summary of Contents for BLADE 120 DEGREE BL-4
Page 13: ...120 DEGREE BLADE 12 FINAL SCREW AND TIGHTEN BEAM LOCKS 10...
Page 17: ...120 DEGREE BLADE 12 FINAL SCREW AND TIGHTEN BEAM LOCKS 14...
Page 22: ...END PANELS BL 4 A8 PARTS LIST QTY PRODUCT CODE 1 BEP or BCEP Quantity is for one panel 19...
Page 24: ...210 648 2095 mycleardesign com 2021 Clear Design All rights reserved...