5
W
O
R
K
ST
A
T
IO
N
3 | PLACE FRAME ON SURFACE
Secure flat plate, flat bracket(s), and support bars to the surfaces using
screws (F).
Extend beam to fit table size accordingly. Secure locking screws on the
adjustable beam and attach to surface using screws (F).
Note: If using surface-mounted dividers, keep the frame 1.5 inches inset from
the surface edge. If not using surface-mounted dividers, bring frame flushed
to edge of surface. Use additional flat brackets as needed.
Flat Bracket
Support Bar
Flat Plate
