303.872.4477 [email protected] clearcomfort.com
14
INSTALLING THE CLEAR COMFORT
INJECTION ASSEMBLY
AIR FLOW METER
1. Measure the air flow rate from the venturi in circulation mode.
2. If 3 LPM is not achieved, contact Clear Comfort for options for your
particular spa.
3. If 3 LPM is achieved, disconnect flow meter and reconnect tubing to
check valve.
OPERATING INSTRUCTIONS
1. Install plumbing according to Figure 4.
2. Ensure bypass 3-way port valve is OPEN before turning pumps ON.
3. Turn spa pump and filtration systems on.
4. Set venturi air suction to draw between 3 - 5 LPM.
5. To increase the draw of air from venturi system, adjust or slowly close
bypass 3-way port valve.
6. Toggle Clear Comfort system switch to the ON position.
7. Water entering the spa should have bubbles exiting from at least one
of the returns on to the body of water.
FLOW
Figure 7: 1/4” One-Way Air Check Valve
From CCW50 System
Figure 8: Air Flow Meter
To Venturi
From CCW50 System
To Venturi
FLOW
From CCW50 System
To Venturi
3 - 5
LPM