What’s in the box:
BaseStation
●
CM-944 series BaseStation
●
Power Cord
●
Omni-directional whip antenna
●
3.5mm to 3.5mm 3 conductor data pairing cable
»
Used to pair a BaseStation to the BeltStation(s)
●
USB-A to USB-B cable
»
Used to update BaseStation firmware
●
USB-A to Mini-USB
»
Used to update BeltStation firmware
●
BaseSync cable
»
Used if you have more than one BaseStation
»
Improves RF performance when using multiple systems
●
CD with manual, T-Desk software
BeltStation
●
CP-942 series BeltStation
●
Li-Poly rechargeable battery
●
5VDC wall charger with Mini-USB connector
Remote Transceiver (optional)
●
Remote RF transceiver
●
RJ-45 to RJ-45 CAT-5 cable
●
Omni-directional whip antenna
●
Mounting Plate and screws
5 Bay Battery Charger (optional)
●
Battery Charger
●
AC Cable
Note: Charge ALL BeltStation batteries prior to set-up.
What else you may need:
●
Headset, one for each user; may be dynamic or electret
microphone, with a 4-PIN XLR female connector
●
3-PIN XLR cables to connect to external 2-Wire Intercom
system
●
RJ-45 cables to connect to external 4-Wire Intercom
system
●
RJ-45 cable to connect to PC for T-Desk LAN control
Tempest
®
900
399G080 Rev A 15 July-2014
4-Channel QuickStart
Guide
