16
PG16-TP and PG8-TP User Guide
8
Channel Allocation: SANE
The standard channel allocation is as follows:
Audio
64 Channels @ 48 KHz
Ethernet
100 MBit Fast Ethernet
8.1
PG16-TP with PG32-AES-FX
The control of the microphone preamps, levels etc. is enabled by choosing an PG16 with the appropriate card
configuration in the
LOCAL SETTINGS
dialog of the PG32-AES-FX under
PORT SETUP
. Up to four PG16 and eight
PG8 units can be connected to one PG32-AES-FX using BI-B, Tri-A or Tri-B cables. The
I/O
configuration of each
PG32-AES-FX port depends on the card configuration of the attached PG16 device:
Cards
DEVICE
I/O
2 x MIC IN
PG16
16 In
2 x LINE IN
PG16
16 In
2 x LINE OUT
PG16
16 Out
1 x MIC IN and 1 x
LINE IN
PG16
16 In
1 x MIC IN and 1 x
LINEOUT
PG16
8/8 Reverse
1 x LINE IN and 1 x
LINEOUT
PG16
8/8 Reverse
1 x DUAL MIC
PG16
16 In
If
8/8 REVERSE
is chosen, physical channels 1-4 (audio channels 1-8) of the D-Sub-25 ports on the PG32-AES-FX
are outputs, physical channels 5-8 (audio channels 9-16) are inputs. The PG16 AES ports are configured as eight
inputs first followed by eight outputs. Therefore by using the straight-through BI-B cable and choosing
8/8 REVERSE
the inputs and outputs of the PG32-AES-FX and PG16 are connected correctly.
There is no need to do any further configuration of the PG16/PG8 units. After adjusting the ports of the PG32-AES-
FX and connecting the BI-B, Tri-A, Tri-B and word clock BNC cables the PG16/PG8 can be controlled and
monitored using OPTOCORE CONTROL.
8.2
PG16/PG8-TP in SANE Network Applications
The monitoring and operational facilities are only available if an PG16/PG8-TP is connected directly to a PC via
RS232, LAN or USB. In order to connect and control more than one PG16/PG8-TP with a PC the Control is
transmitted by the network. Optocore Control can run multiple times on one PC or use Server Client Mode.