User Guide| KB-702/KB-702GM/KB-802-GM-IM
Symptom
Cause
Solution
connected across the
intercom line. If equipment
other than Clear-Com
intercom equipment must
be connected to the
intercom line, please
contact Clear-Com
application or service
personnel for information or
recommendations.
Far too many terminations
on the intercom line.
Check all main stations and
power supplies to make
sure each intercom channel
is terminated at only one
point.
Plug
P1
missing on circuit
board.
Plug
P1
must be installed in
jack
J1
if the EB7-4W option
is not used.
Page 23
